
Beautiful Noise Effects ENDLESS SLEEPER II
Analog-Voiced Cascading Digital Delay
2.375,00 DKK
In stock and available
In stock and available

Product Description
Beautiful Noise ENDLESS SLEEPER II
the Cascading Delay is back!
Endless Sleeper II is an analog voiced cascading dual-delay pedal with a tonne of versatility and experimentation upgrades over its V1 predecessor.
The dry signal stays fully analog from input to output, while the wet signal passes through two digital delay chips, each with controls for DELAY (Mix), D. TIME, GLIDE and FEEDBACK. Each delay time ranges from 30ms to 1500ms: the longer the delay time, the further the trails degrade into grainy shades of low fidelity.
Self-oscillation mode will occur by either raising the FEEDBACK knobs, or by engaging the OVERLOAD foot-switch, momentarily maxing out both delay’s feedback controls for hands-free sonic mayhem.
The GLIDE control modulates the pitch of each delay line, with individual rate adjustments and two LFO’s that are selectable between SINE, SQUARE, and RANDOM waveforms. This adds a rich layer of warbling textures—lush chorus, vibrato, flutter & wow, or deep waves of pitch shifting madness.
The CRUSH control drives the delay’s output into an analog sample rate reducer, which crushes your signal down to emulate sounds similar to 8-bit gaming consoles and microcomputers of the 1980’s, with an added MIX control to blend from a sparkly lo-fi bit-crushing effect, to an aggressive 8-bit fuzz.
The most experimental feature, symbolised as <<< forces the output of DELAY II back into the input of DELAY I, causing a third delay line, adding an additional repeat to every previous sequence of repeats, for the creation of subtle ambient-echo textures to total synthetic dream simulation.
Main Features:
- Analog-voiced Digital Delay effects pedal
- Dry/wet mix control from 100% wet to100% dry, or ‘unity’
- Delay time, from approximately 30ms to 1500ms – The longer the delay time the more lo-fi the signal becomes, resulting in noise, distortion and other strange artifacts
- Adjustable delay feedback – from slapback on lower settings, to endless repeating and chaotic oscillations on higher settings
- Reducible output sample rate, from a soft sparkly chime on lower settings to a total 8-bit fuzz sound
- Pitch modulation of the delayed signal
- LFO waveform switcher (Sine, Square and Random)
- Modulation rate toggle switch (LFO rates adjustatable with internal trimmer):
- Left is a slow ‘wow and flutter’ style of modulation
- Right is a faster chorus/vibrato rate
- Overload footswitch – When held down it momentarily maxes out both FEEDBACK controls.
- Handmade in Newcastle, Australia
- Powered by 9V DC power supply
(standard 2.1mm, – center, 90 mA current draw)
Additional information
Other Products From
Beautiful Noise Effects
More from
Beautiful Noise Effects